Subscribe to RSS
UnitedStates Germany Russia India Turkey SouthAfrica England Netherlands Philippines Belgium Australia Brazil Spain China Kore

National Engineering Industries to invest Rs 700 cr in 4 years

New Delhi: CK Birla group firm National Engineering Industries Ltd is scaling up investments to Rs 700 crore for the next four years to expand production capacity, a top company official said on Wednesday.

ZeeNews

The company, which sells its bearings under the NBC brand, said it is setting up a new plant in Gujarat to partially meet export demand after getting good response from markets like US, Germany, Brazil and South Africa.

“The kind of response that we are getting in international market is very encouraging and that’s why we are increasing our investments in the next four years,” National Engineering Industries President and CEO Rohit Saboo said here.

He was speaking to reporters on the sidelines of annual convention of Automotive Component Manufacturers Association of India (ACMA).

Earlier, the company had announced an investment of Rs 500 crore till 2016.

“Now we are planning to spend Rs 700 crore in the next four years. This would go into product development and new manufacturing facilities,” Saboo said.

Of the total investments planned, Rs 500 crore will be for the Gujarat plant and the rest Rs 200 crore would be spent on Jaipur plant and R&D activities, he added.

Construction of the Gujarat plant will start from the coming Diwali and production is expected to start by July next year.

The new plant in Gujarat, which will be the company’s fourth facility, will mainly supply to Hero MotoCorp and Maruti Suzuki and 25 percent of the production would go for exports, he said.

The company’s three plants are located at Jaipur, Newai and Manesar.

Last year only 5 percent of the company’s production was exported and this year it has already increased to 11 percent, Saboo said.

At present the company is supplying parts to Daimler trucks in Germany and it is in advanced stages of talks with BMW for supplying parts to the latter’s electric vehicle programme.

Asked if the company was looking to set up plants in overseas locations, he replied in the negative but said the firm was looking at acquiring companies, mainly in Eastern Europe, Germany and Spain.

“We are looking at four to five companies which are worth around USD 50 million,” he added.
On R&D expenditure, Saboo said in 2010 the company had spent 0.4 percent of turnover on the same, which increased to one percent last year and plans to take it to 2.5 percent by 2016.

The company had a revenue of Rs 1,200 crore in FY12.

 

Source: Zee News

0 commentsback to post

banner

Add your comment

Nickname:
E-mail:
Website:
Comment:

*

Other articlesgo to homepage

NSK成功开发“高性能圆锥滚子轮毂轴承单元”

NSK成功开发“高性能圆锥滚子轮毂轴承单元”(0)

This article, press release or announcement is translated from BearingNEWS (www.bearing-news.com) publications or from China Bearing Commercial Community (CBCC) sources.  日本精工株式会社(以下简称NSK)成功开发了皮卡、大型SUV、商用车用“高性能圆锥滚子轮毂轴承单元* 1”。该产品通过集成化以及低摩擦技术的应用,有助于提高汽车的可靠性并降低油耗。 NSK预计到2023年该产品的销售额达到50亿日元。 开发背景 圆锥滚子轮毂轴承单元的寿命及刚性均优于同等尺寸下的球轴承寿命,因此被广泛应用于皮卡,大型SUV和商用车辆。但是,球轴承已经发展到第3代(HUB主轴一体化)并且已被广泛应用,与之相比,大多数圆锥滚子轴承因受到生产制约而使用两个单列轴承,或者仅到第1代和第2代的应用为止。因此,整车厂以及市场上的轮毂轴承在更换时需要组装主轴,存在可能由于压装不良和预紧力过度或不足而导致诸如异响等市场问题的产生。由此,第2.5代(已安装主轴)和第3代产品的需求日渐增加。 此外,由于各国的环保法规和燃油效率标准日渐苛刻,因此对经济型燃油的研发也扩大至乘用车领域以外的车辆,因此减小圆锥滚子轮毂轴承单元的摩擦成为一个重要课题。 本产品特点 1. 通过单元化提高可靠性 NSK在现存第2代圆锥滚子轮毂轴承单元的基础上开发出已预先安装HUB主轴的第2.5代产品。并且,将HUB主轴与内圈进行一体化的第3代产品也正在开发中。 NSK通过实施HUB主轴预装和预压控制,可以防止压装不当以及拧紧力矩过大或不足等不良情况的产生,有助于提高产品在市场上的可靠性。 2. 低摩擦技术的应用 NSK通过乘用车球轴承的研发和生产,在润滑脂,密封圈以及高密封性端盖方面累积了成熟的技术。通过以上技术,第2.5代产品已实现约20%至35%的摩擦力矩降低(与第2代相比)。 并且,第3代产品可以进一步低减约10%的摩擦。 产品效果 本产品作为针对皮卡、大型SUV和商用车的轮毂轴承,通过低摩擦技术以及集成化技术的应用,可为提高汽车可靠性和降低油耗做出贡献。

SKF制定新气候目标

SKF制定新气候目标(0)

在2016年年底,SKF集团结束了一项为期4年的解决气候变化的方案,使其自身正常运转的能源使用量减少了14%,货物运输排放量减少了31%。 此外,SKF的BeyondZero客户解决方案-为客户带来显著环境效益的产品和解决方案的销售额达到7亿欧元,较上年增长15%。 SKF的新气候目标将延长至2025,以2015年为基准年。SKF在此期间的目标是减少每吨轴承销售和每吨产品出货量40%的二氧化碳排放量。此外,该集团将继续其不断扩大的BeyondZero客户解决方案业务以及其在能源效率供应链上的进展报告。                

Fangyuan Slewing Ring Co. delivered a slewing ring for all-casing drilling rig

Fangyuan Slewing Ring Co. delivered a slewing ring for all-casing drilling rig(0)

A 2.23 m all-casing drilling rig slewing ring was successfully launched in Maanshan Fangyuan Slewing Ring Co., Ltd on September 25, 2014, which marked the company’s expansion of slewing ring applications. Tested by the high-precision large coordinate measuring machine, the all-casing drilling rig slewing ring is proved to have an gear accuracy of grade 7,

China Railway Corporation: the safety and reliability of wagon bearings from LYC ranked first in all supplier factories

China Railway Corporation: the safety and reliability of wagon bearings from LYC ranked first in all supplier factories(0)

According to the Safety and Quality Notification of Wagon from March to Jun, 2014 issue by China Railway Corporation, the safety and reliability of wagon bearings from LYC ranked frist in all supplier factories. The statistical results showed that the safety and reliability of LYC wagon bearing has been raised again.

First batch of second generation heavy truck hub bearings from LYC rolled off the assembly line

First batch of second generation heavy truck hub bearings from LYC rolled off the assembly line(0)

On August 11, the first batch of second generation heavy truck hub bearings developed by LYC rolled off the assembly line in the automotive bearing division of the company and then entered to the bench test stage. The picture above shows the worker in the automotive bearing division was testing the product.

read more

Contacts and information

Social networks

Most popular categories

Legal Notice

© 2016 BEARING NEWS All rights reserved.